Phone number:
(587) 885-9120
Balanced lifting starts with the right spring
Garage Door Spring Replacement in Calgary
Broken spring, visible coil gap or a door that suddenly feels heavy? We inspect the complete counterbalance system and install springs matched to the door.
Stop at a Broken Coil
Do not force a door with a visible spring gap
Matched to Door Weight
Spring size is based on the complete door
Balance Checked
The door is tested independently of the opener
Open Daily
7am to 10pm
The spring carries the load
Spring Replacement Is More Than Swapping a Coil
A garage door spring is part of the counterbalance system. It stores energy so the door can move with controlled effort instead of making the opener lift the full door weight. When a spring breaks or loses the correct torque, the door may become too heavy, rise unevenly or stop after a few inches.
We identify the spring system, inspect the shaft, drums, cables, bearings and attachment points, then determine the correct replacement for the door. That wider inspection matters because a garage door cable failure or worn bearing can produce symptoms that look like a spring failure. If the cause is not yet clear, start with our garage door repair service.
- Torsion and extension spring systems
- Single-spring and two-spring configurations
- Broken, stretched or incorrectly sized springs
- Related cable, drum, bearing and bracket concerns
- Final balance and opener travel check
Know when to leave the door closed
What Should You Do When a Garage Door Spring Breaks?
Stop using the door and keep people away if a spring has separated, a cable is loose or the door is hanging unevenly. A spring system is under stored tension even when the door is not moving. Do not loosen set screws, remove bottom brackets or attempt to wind a spring without the correct training and equipment.
If the door is closed, leave it closed until it can be assessed. If it is open or partly open, do not stand beneath it. Tell us whether the door is open, closed or partly open when you call.
Visible coil gap
A separated torsion coil above the door is a common sign of a break.
Sudden heavy movement
A door that was easy to move and is now very heavy may have lost counterbalance.
A diagnosis before parts are ordered
How We Match the Replacement Spring
The spring must suit the door, not simply resemble the part that came off. These checks shape the repair recommendation.
Door Weight
Panel construction, insulation, windows and reinforcement all affect the load.
Door Height
Height changes cable travel and the spring characteristics required for full movement.
Spring Type
Torsion and extension systems use different hardware and service procedures.
Existing Setup
We confirm the number of springs, shaft arrangement and available mounting space.
Hardware Condition
Bearings, drums, cables and brackets are checked before the new spring is tensioned.
Door Balance
The completed door should hold and move correctly before the opener is reconnected.
A controlled four-step service
Our Spring Replacement Process
STEP 1
Confirm
Identify the spring failure and inspect the connected counterbalance hardware.
STEP 2
Match
Select the spring specification for the door’s weight, height and configuration.
STEP 3
Install
Secure the door, replace the spring and set the required tension safely.
STEP 4
Balance
Cycle the door by hand, reconnect the opener and complete the final movement check.
Two springs may share the same working life
Should Both Garage Door Springs Be Replaced?
On a two-spring torsion system, both springs usually complete the same number of cycles. If one has failed from age and the other is the same specification and installation date, replacing the pair can reduce the chance of a second service interruption soon afterward.
It is not a rule for every door. The correct decision depends on the remaining spring, the door configuration and whether the existing pair was properly matched. We explain the condition we see and quote the applicable options instead of treating every system the same.
- We compare the age and condition of both springs.
- We confirm that the current spring pair is correctly matched.
- We check whether a previous partial repair changed the system.
- We review related cables, drums and bearings at the same visit.
Pricing depends on the door and hardware
What Affects Spring Replacement Cost?
Door size and weight, spring type, spring count, shaft and bearing condition, access above the opening and related cable or bracket damage can all change the work. A photo of the spring area and a full photo of the door help us prepare. The correct spring is confirmed from the door specifications and existing hardware. For balance and hardware checks before a failure, see our garage door maintenance service.
- Door height and total weight
- Torsion or extension setup
- One-spring or two-spring system
- Condition of cables, drums and bearings
- Access and unusual track arrangements
Help Us Prepare
Send one clear photo above the closed door and one photo of the full door from inside. Do not climb or move the door to take a better picture.
Free EstimateSpring Systems and Door Configurations
These images show torsion hardware above a sectional door and a residential door that relies on correct counterbalance. The spring is only one part of a connected lifting system.
View Gallery
Citywide and nearby communities
Spring Replacement Service Area
We schedule garage door spring replacement throughout Calgary. For a nearby community, send the full address so we can confirm availability. Share the door position and whether the spring is above the door or along the side.
Clear answers before service
Spring Replacement Questions
Can the opener compensate for a weak spring?
No. The opener should move a properly balanced door, not replace the counterbalance system. Continuing to run an unbalanced door can strain opener components and make movement less predictable.
Why are the lift cables loose after a spring breaks?
When counterbalance tension is lost, the cables may no longer remain properly loaded on the drums. The cables and drums should be inspected before the door is moved or a new spring is tensioned.
How long do garage door springs last?
There is no single calendar life for every spring. Cycle rating, daily use, door balance, corrosion, hardware condition and whether the spring was correctly matched all affect service life.
What is the difference between torsion and extension springs?
Torsion springs turn on a shaft above the door. Extension springs stretch along the horizontal tracks. They use different supporting hardware and service procedures, so the existing system must be identified before parts are selected.
What information helps you prepare for spring service?
Tell us whether the door is open, closed or partly open. From a safe position, send one photo of the full door and one of the spring area above or beside it. Do not climb or move the door to take a photo.
Leave a broken spring to trained hands
Need Spring Replacement?
Tell us whether the door is open or closed and send a clear photo of the spring area. We will use those details to prepare for the service call.